 The main component of the Softie mount is a one piece rubber (actual material: EPDM) diaphragm shockmount. This unit is extremely robust, and has been tested in all environment conditions to ensure it performs.
The Softie Mount comes in three sizes, depending on which microphone being used.
- Small Hole 19-20mm diameter
- Medium Hole 21-22mm diameter
- Large Hole 24-25mm diameter
The mounts are 58mm diameter x 56mm long, and support short to medium length shotgun microphones. Please use the "Product Finder" to see what size you need for your mic. The Softie mount will only fit shotgun microphones, which are cylindrical in shape (the same diameter though their whole length). We can not mount microphones that taper, with the Softie mount.
The longest Softie Windshields we make have an internal bore of 32cm (12-1/2") - Example:AKG CK68 or Audio Technica AT815b. These are the longest microphones we would recommend using a Softie Mount for, simply because the mount is flexible & can not support longer mics. For longer mics, we would only recommend a Full Windshield System, and a Modular suspension.
The Softie Mount, used with the Softie Windshield provides a fast, flexible and cost effective solution for ENG on camera microphones.
 Softie Mount & Handle
This system will allow the user to either hold the mount with the pistol grip handle. Or attach it to a boom pole using the 3/8" Whitworth threaded insert in the base of the handle. This gives a very robust mounting system, which will be suitable for most situations.
 Softie Mount CCA
The Softie CCA allows you to attach your shotgun microphone tocamcorders fitted with a microphone clamp (25-27mm diameter) or a boom pole. The Softie mount provides isolation against lens motor noise and general handling noise.
- Suitable for: Sony HDR-Z1E, Canon XL1 & XL2 and many more.
- Note: The CCA replaced the Softie mount & Boom adaptor in February 2006.
 Multimount v2
The Multimountv2 allows the user to fit the Softie mount to either a camcorder hot-shoe or to a boom pole with 3/8" Whitworth tip.For more details click on the image. Note: The v2 version of Multimount replaces the old style of Multimount. |
 |
|
