Microphones on Stands
Stand Clamp
 SG 20
- for a microphone with 20 mm in diameter (e.g. CMC or
CMBI)
The base of the SG 20 has a 5/8"-27 NS internal thread.
A threaded adapter is supplied for 3/8" and 1/2" mounting.
The angle can be varied continuously in the vertical plane.
Color: gray
Stand Clamp
SG 22
The angle between the microphones can be varied as well
as the angle of inclination for the pair. However, the SG
22 is not suitable for stereo pickups because of the very
limited range of angles and spacings possible between the
microphones. It is primarily intended for holding a main
microphone and a backup when extreme operational security
is required.
In the mid-position (shown at left) the microphones are
oriented perpendicular to the microphone stand. The angle
of inclination is +90° to -90° from the mid position.
 Stand Clamp
SG 22 MOD
Holds two microphones in parallel alignment. Their distance
can be varied from 4 mm to 52 mm, while they can be oriented
parallel to the stand, perpendicular to the stand, or at
any angle in between.
Certain "near-coincident" microphone arrangements
for stereo recording can be created in this way. With a pair
of CMC amplifiers placed upright side by side, radially-addressed
Colette directional capsules (the MK 4V, MK 41V, MK 6 and
MK 8) can be used with any desired angle set between their
main axes.
The other directional capsules (the MK 4, MK 41 and MK 5)
can be used with GVC angle adapters; even some coincident
microphone setups are then possible.
Miniature Swivel Stand Couplers
SGC, SGCM
- for CCM Compact Microphones or Active Cable with MK microphone
capsule
- adjustable from 0° through 100° in either direction
The internal thread of the SGC or SGCM screws onto any 3/8" rod
(e.g. vertical support rods STR) or stand adapter.
 |
SGCM
all-metal clamp with black chrome finish – stable construction
with knurled screw for especially secure grip |
SGC
Clamp made of gray plastic material – the unobtrusive,
esthetic standard version |
The SGC is an integral part of the HC cable hanger and the
TCg table stand.
Color: gray/ black
 Elastic Suspensions with Swivel
A 20 S, A 20
- for a microphone with 20 mm diameter (e.g. CMC or CMBI)
The A 20 is recommended when only the CMC microphone amplifier
and an MK capsule are used, and maximum protection from vibration
is desired, for example, on a boom.
 When accessories such as the CUT filters, GVC or SKC 200g
are added to the microphone, the stiffer elastics of the
A 20 S standard version are required.
A special clamp secures the microphone cable. This is necessary
with the A 20 and advantageous with the A 20 S.
The microphone can be tilted to any angle.
Threads: 5/8"-27 NS with adapter for 3/8" and 1/2"
Color: gray
 Elastic Double Suspension
A 22 S, A 22
The angle between the microphones can be varied as well
as the angle of inclination for the pair. However, it is
not suitable for stereo pickups because of the very limited
range of angles and spacings possible between the microphones.
This type of clamp is primarily intended for holding a main
microphone and a backup when extreme operational security
is required.
The A 22 S is the standard version. The A 22 has softer elastics.
 Color: gray
Elastic Miniature Suspension
with Swivel AC
- for CCM Compact Microphones or Active Cable with MK microphone
capsule
- variable angle
Matching pop filter: B 1 or B 5. Not intended for use with
larger, heavier windscreens.
Diameter: 61 mm; thread: 3/8"; color: gray |
 |
|
