Table Stands for modular Microphones
 Table Stand
T 20g
- tripod for a standard microphone of the Colette Modular System (CMC, 20 mm diameter)
- the microphone can be tilted to any desired angle
Surface finish: matte gray (g)
Table Stand
TA 20g
As T 20g, but with integral shock mount.
Surface finish: matte gray (g)
Active Table Stand
TR 200 KC 2g
- elegant design
- fully adjustable swivel joints at both ends of the tube
 This elegant microphone table stand is easily adjusted in height and angle, thus offering an esthetically pleasing alternative to goosenecks, which are often twisted into awkward shapes.
The cable brought out at the base of the TR 200 KC 2g can be connected to any microphone amplifier of the Colette Modular System (except for CMBI).
Cable length is 2 m; other lengths can be ordered.
Base diameter: 80 mm
Height when extended, without capsule: 230 mm
Surface finish: matte gray (g)
The capsule is not included.
Miniature Table Stand
TCg, TC 2g
These elegant table stands, with vibration-isolating base, can be placed unobtrusively. The vertical rod is removable, allowing the microphone to be mounted on the base close to the mounting surface.
A neat cable run is obtained when the cable is put into the wire loop between the bolt and the socket.
Dimensions: base diameter: 57 mm
height: 80 mm
Surface: matte gray (g)
The microphone(s) are are not included.
MK microphone capsule(s)
KC or KCY Active Cable
CMC 6 Ug microphone amplifier
(not shown)
or
CCM-L/ U Compact Microphones
TC table stand
Heavy Table Stand
T 5g
- solid metal
- with 3/8" threaded stud, e.g. for STR support rods
 Dimensions: diameter: 129 mm, height: 52 mm
Weight: 1.5 kg
Surface finish: matte gray
CMC 6 Ug microphone amplifier,
SG 20 stand clamp,
T 5g heavy table stand
Table Stands for Compact Microphones
 Table Stand
TR 200 Lg
- elegant design
- fully adjustable swivel joints at both ends of the tube
The required K 5 LU adapter cable (Lemo to XLR-3M) is included with the CCM-L.
The TR 200 Lg is also available with permanently attached cable, either at the rear or the bottom of the base.
Surface finish: matte gray (g)
The CCM microphone is not included.
 Twin Table Microphone
T2 CCM 4g
This table microphone consists of two CCM 4 Compact Microphones (cardioids) rigidly attached to one another and facing in the same direction.
 They can be tilted forward or backward together. The second channel serves as a fail-safe backup. The permanently attached output cable terminates in an XLR-5M connector.
Cable: 5 m
Surface finish: matte gray (g) |
 |
|
