Accessories for Modular Microphones
Active Tube
RC
- adjustable angle 0° (extended) to 120°
The RG 8 swivel clamps the Colette tube onto a vertical support rod, allowing adjustment of the tube's height and angle. The angle of the capsule relative to the tube is adjustable independently from 0° (fully extended) to 120°. This gives the Colette tube a very wide range of applications.
RC 350g: length: 350 mm
recommended stand base (if the vertical support rod is fairly short): T 5
RC 700g: length: 350 mm
recommended stand base: BF 250
RC 1200g: length: 1200 mm
recommended stand base: BF 250
Special lengths – up to 1200 mm – can be ordered.
Included accessory: swivel joint RG 8
Recommended windscreen: B 5 D
Note:
Though not specifically designed for such use, the laterally addressed capsules MK 4V, MK 41V, MK 8 and MK 6 can also be used on the Active Tube RC or the variable angle joint GVC; when fully tightened they will rarely be aimed where you intend. On request we will supply an elastic ring which can be slipped over the threads of the RC or GVC so that the final turn of the capsule will place it at the desired angle of rotation.
 Special Version of the RC Active Tube:
RC KC
This special type of Colette Active Tube terminates in a connector mounted on a flexible, 0.5-meter Colette cable. This connector is screwed onto the microphone amplifier, which may then be mounted on the vertical support rod with a clamp or inserted in the cable path at a hidden position.
This arrangement is most useful when working in close quarters, where inadvertent movement at the rear of the microphone stand might disturb the alignment, or where the microphone amplifier body and cable connector might be objectionable and when the arrangement is not changed frequently.
The possible drawbacks are:
The inconvenience of wrapping and securing the cable attached to the tube especially if it is long.
The length should not exceed what is necessary, in order to avoid possible interference.
Both of these problems can be avoided by choosing a similar
arrangement with the Compact Microphone CCM-L instead.
Type designation: e.g. RC 350 KC: 0,5g = RC 350g with 0.5 m cable length
Special lengths are available on request.
Surface finish: matte gray (g)
Included accessory: swivel joint RG 8
 Special Version: Double Tube
R2C KC
Twin version of the RC KC Colette tubes of the Colette Modular System. Each tube terminates in a connector mounted on a flexible, 0.5-meter Colette cable. These connectors are screwed onto the microphone amplifiers, which may then be mounted on the vertical support rod with clamps or inserted in the cable path at a hidden position.
The second channel serves as a fail-safe backup.
Type designation:
e.g. R2C 350 KC 0,5 g:
350 mm tube length, 0.5 m cable length
Surface finish: matte gray (g)
Matching windscreen:
B 55 D (twin B 5 D)
Accessories for Compact Microphones
 Microphone Tube
RL
- extension tube for CCM-L Compact Condenser Microphones
- at the front end: Lemo socket; at the output: Lemo plug for the existing adapter cable of the CCM-L
- the swivel at the front end can be set from 0° (fully extended) to 120°
Standard lengths:
RL 350g: 350 mm
RL 700g: 700 mm
RL 1200g: 1200 mm
Tube diameter: 8 mm
Surface finish: matte gray (g)
Other lengths can be ordered; please inquire about delivery times.
The RG 8 swivel joint is included.
The K 5 LU adapter cable is included with the CCM-L.
RL microphone tube, used for setting up a microphone on a table top. |
 |
|
